Xiaopeng Office Chair

Information about Xiaopeng office chairs mainly involves two categories: modification scenarios and original factory designs, as detailed below:

1. Modification of Xiaopeng X9 Front Passenger Seat into an Electric Office Chair

This solution achieves functional transformation by disassembling the car seat and adding office components. The key points are as follows:

1. Materials and Tools

   • Custom aluminum plates are required as connectors between the seat and the base, secured with M8 screws;
   • Choose 6D adjustable armrests (adjustable up to 60cm) to accommodate users of different heights;
   • The office base should have wheels and a recommended height of ≤22cm to avoid conflicts with seat adjustment functions;
   • The power supply uses a 12v battery (e.g., Delipow 5000mAH), powered through a domestic automotive wire harness plug connector (2005431-1 male).

2. Modification Steps

   • Power Test: First, connect the battery to the seat motor to verify functions such as ventilation and adjustment are working properly;
   • Armrest Installation: Fix the 6D armrests on both sides of the seat, ensuring smooth lifting and rotation functions;
   • Base Fixation: Connect the seat to the office base using aluminum plates and secure with M8 screws;
   • Wheel Assembly: Finally, install the wheels and check for smooth sliding stability.
   • The entire process takes about 25 minutes and requires some hands-on skills. User feedback indicates that the finished product is more comfortable than commercially available office chairs and supports forward and backward movement of the seat cushion, backrest adjustment, and ventilation (requires additional installation of a knob).

2. Design Logic of Xiaopeng Original Factory Seats

1. Headquarters Office Chairs: Functionality First

   • Employees have complained that the new headquarters seats have a "large depth and insufficient lumbar support," but the company prioritizes "universal functionality" in design, such as a flat-lying mode for naps, to balance cost and efficiency.

2. G9L Zero-Gravity Seats: Intelligent Comfort

   • These are high-end original factory configurations that achieve "real-time adjustment with changes in sitting posture" through AI active fitting technology. For example, when a user leans back, the seat automatically adjusts the lumbar support angle and leg support position to reduce localized pressure.
   • This function relies on built-in sensors and an electric adjustment system, requiring no manual operation from the user, but cannot be achieved through modification.

Summary: For those seeking a low-cost DIY office chair, the modification plan for the X9 front passenger seat can be referenced, with attention to material compatibility and hands-on skills; for those pursuing intelligent comfort, the zero-gravity seats of the Xiaopeng G9L are the best original factory solution, but only available in new cars.