Lianping Office Chair Renovation

For office chair renovation in Lianping, the following general steps can be referred to for operation:

Thorough Cleaning, Replacement of Wear-and-Tear Parts, and Surface Polishing

• Complete Disassembly and Cleaning: Use a screwdriver to disassemble components such as the seat, backrest, and armrests. Wipe the chair frame carefully with a soft cloth dipped in a neutral detergent. For stubborn stains, use alcohol wipes for treatment. If the chair has a mesh seat, rinse it with a showerhead and let it dry.
• Replacement of Damaged Parts: For the gas lift, invert the chair and knock out the old gas lift with a rubber mallet for replacement. The wheels can be directly plugged in and out for replacement. It is recommended to purchase silent casters to enhance the user experience. If the leather seat is severely damaged and beyond repair, an elastic chair cover can be purchased online and wrapped directly.
• Function Debugging and Polishing: After assembly, adjust the chair's height adjustment and tilt functions to ensure they operate normally. For paint chipping on metal frames, use anti-rust paint for spot coating. For scratches on plastic parts, lightly heat them with a hot air gun to fade the marks.

Removal of Old Fabric, Installation of New Fabric, and Paint Maintenance

• Removal of Old Fabric: First, use tailor's scissors to cut open the connection between the old fabric and the chair frame, then use a manual staple gun to remove the staples securing the old fabric one by one. If the old fabric adheres tightly to the frame, first heat it with a hot air blower to soften the glue, then slowly tear it off.
• Installation of New Fabric: It is recommended to choose durable tech fabric for the new fabric. When covering the new fabric, reserve a 5-centimeter edge for fixation. During operation, lay the new fabric flat on the chair frame, gradually flatten it from the center to the surroundings, and use a staple gun to fix it, inserting a staple every 3 centimeters.
• Paint Maintenance: If the chair frame is wooden, sanding treatment is required first. Use sandpaper to gently sand along the wood grain direction to remove the old paint and burrs on the surface. After sanding, choose an appropriate wood paint for spraying. The spraying should be done in three times, with an interval of 1-2 hours between each spraying.

Simple Renovation Operations

First, remove the backrest panel and spray silver spray paint on the support rod. Reupholster the seat cushion, apply glue, staple the edges with a stapler, then reupholster the backrest, and finally install it back.