Sam Office Chair Installation

The installation of Sam office chairs should be carried out step by step according to the specific model (such as gaming chairs or children's study chairs). The core process includes checking components, assembling the main structure, installing additional components, and conducting functional tests, as detailed below:

I. Installation Steps for Gaming Chairs (Taking the Andaseat Co-branded Model as an Example)

1. Checking Components
   Ensure all parts are complete, including the backrest, seat cushion, five-pronged chair base, gas lift, silent casters, footrest, headrest, lumbar pillow, and hardware (screws, Allen wrenches, etc.). The gas lift should be an SGS Level 4 certified product to ensure load-bearing capacity and safety.

2. Installing the Chair Base and Casters
   Align the silent casters with the five holes on the chair base and press firmly until fully embedded. Then, test the wheels by pushing and pulling to ensure they are secure and do not detach during movement.

3. Assembling the Gas Lift and Seat Assembly
   Insert the gas lift vertically into the center hole of the chair base, ensuring the bottom fits snugly against the base. Secure the seat cushion and backrest together with screws (usually requiring an Allen wrench), then align the assembled seat with the top of the gas lift and press down until you hear a 'click' indicating the latch is engaged.

4. Installing Additional Components
   Install the headrest, lumbar pillow, and footrest as needed. The headrest is typically attached to the top of the backrest using latches or Velcro; the lumbar pillow should be adjusted to the lumbar support position; the footrest should be extended and secured to the front bracket of the seat.

II. Installation Steps for Children's Study Chairs (Taking the IC270SZ-A as an Example)

1. Installing Casters and Brake Devices
   Insert the casters and brake wheels into the corresponding holes on the chair base. If a footrest is included, secure it to the side of the chair base with bolts to ensure foot support for children during use.

2. Connecting the Gas Lift and Decorative Cover
   Insert the gas lift into the center hole of the chair base, then snap on the decorative cover to conceal the connection, enhancing aesthetics and preventing dust ingress.

3. Securing Armrests and Backrest
   Use bolts and self-tapping screws to connect the armrests, backrest bracket, and seat assembly. Pay attention to the tightness of the screws to avoid loose structures causing wobbling or over-tightening damaging plastic parts.

4. Final Assembly and Adjustment
   Insert the seat assembly into the backrest bracket, tighten the bolts at the back of the backrest to secure it, then plug in the plastic hole plugs to hide the screw holes. Test the seat's height adjustment and backrest tilt functions to ensure they work properly and that the chair is safe for children to use.

III. General Precautions

• Always refer to the instruction manual or installation video before installation. Different models (such as BD270NX-A-SAM) may have varying steps, so follow the product's accompanying materials.
• Do not skip the functional test: After installation, check that the gas lift raises and lowers smoothly, the wheels roll without stuttering, and the backrest adjusts flexibly to ensure there are no safety hazards before use.