Office Chair Headrest Installation
Installing a headrest on an office chair can be achieved through modification, purchasing a compatible headrest, and installing it. Details are as follows:
Modification Process: If you have the skills and the office chair's structure allows, you can modify it yourself. For example, a customer's company had 11 office chairs without headrests. They prepared two electric tools: a screwdriver with a 6mm hex bit for installing embedded nuts and an 8mm twist drill for drilling holes, along with a 5mm hex bit for securing the headrest screws. They also needed a large bag of 6mm embedded nuts, with lengths selected based on the drilling situation, such as 13mm. The entire modification process took two hours. During the process, the headrest might be installed crookedly, but it could be adjusted successfully in the end. However, self-modification carries certain risks. If you are unfamiliar with the chair's structure or operate improperly, you may damage the chair.
Headrest Types and Prices: There are various office chair headrests available on the market. For example, the "Office Chair Headrest Heightening Computer Chair Headrest Backrest Heightening Headrest Installation Nap Pillow Workstation Reclining Sleep" is priced at 12.5 yuan with 335 monthly sales; the "Office Chair Headrest Nap Computer Chair Heightening Headrest Backrest Neck Pillow Workstation Nap Seated Reclining Sleep Gadget" is priced at 43.5 yuan with 1 monthly sale. Different types of headrests vary in function, material, and design, and their prices also differ. You can choose based on your own needs and budget.
Installation Steps: Taking the W6023 model as an example, first insert the five casters into the five-star base one by one, and insert the thicker end of the gas lift into the five-star base and press it gently. Then, align the backrest with the four screw holes on the seat cushion, and secure the backrest to the seat cushion with four long screws and tighten them. Next, align the armrests with the six screw holes on the seat cushion and backrest, and secure the armrests to the seat cushion and backrest with four medium screws and two short screws and tighten them. After that, align the tray with the four screw holes on the seat cushion, and secure the tray to the seat cushion with four short screws and tighten them. Insert the gas lift into the round hole of the tray. Finally, align the headrest with the screw holes on the backrest, and secure the headrest to the backrest with two short screws and tighten them. After installation, you can adjust the seat height, and the headrest can be adjusted up and down and flipped.
