Adding a Neck Pillow to an Office Chair
It is feasible to add a neck pillow to an office chair. The following introduces the feasibility of modification, accessory selection, installation steps, and the role of the neck pillow:
Feasibility of modification: Some customers have added headrests to office chairs without them, indicating that adding a neck pillow or headrest to an office chair is technically feasible. However, the modification process requires the preparation of electric tools, such as a screwdriver (with a 6mm hexagonal bit for installing embedded nuts, an 8mm twist drill for modifying holes, and a 5mm hexagonal bit for fixing headrest screws) and a large bag of 6mm embedded nuts (the length is selected according to the hole modification situation, such as 13mm). The time required for the entire modification process varies depending on the condition of the chair. For example, modifying 11 chairs took two hours, and issues such as misalignment may occur during the process, but they can be resolved through adjustments.
Accessory selection: There are various office chair headrests and related accessories available on the market, with different prices. For example, an office chair headrest for raising the height of a computer chair, a headrest for the backrest, a headrest for adding a nap pillow for workstation reclining, with dropshipping, a 7-day replacement guarantee, and 48-hour shipping, is priced at 12.5 yuan with monthly sales of 335 units; an office chair headrest for raising the backrest, extending the backrest of a swivel chair, and adding headrest accessories is priced at 9.5 yuan. Consumers can choose according to their own needs and budget.
Installation steps: The installation steps for headrests vary for different styles of office chairs. Taking the W208 sponge old headrest as an example, during installation, the longer side is the front end, and the shorter side is the rear end. First, turn the five-star base upside down, insert the five casters into the five-star base one by one, insert the thick end of the gas lift into the five-star base, and press gently, paying attention to the front-back position of the seat cushion; then align the armrests with the screw holes on the seat cushion, fix the armrests to the seat cushion with six thin and long screws, and tighten them with a wrench in sequence; then align the tray with the screw holes on the seat cushion, fix the tray to the seat cushion with four thin and short screws, and also tighten them with a wrench; then align the backrest with the screw holes on the tray, first put the gaskets on the screws, then fix the backrest to the tray with three thick and long screws, and tighten them with a wrench; then align the round hole of the tray and insert the gas lift; finally, first align the headrest with the hanger rail and insert it, then fix the headrest to the backrest with two thin and medium screws. After installation, the headrest can be adjusted in multiple dimensions, including up and down, front and back, double-joint rotation adjustment, large-angle rotation, and left-right translation.
Role of the neck pillow: If the seat cushion of an office chair is uncomfortable, adding a small neck pillow to support the lower back can prevent waist soreness during long hours of sitting in the office and help maintain focus on work. The small neck pillow fits the curve of the lower back on the front, has an 8cm golden thickness for support on the side, and has anti-slip particles and elastic straps on the back for fixation, effectively improving comfort.
