Frameless Office Chair Headrest Installation

There are various products available for adding headrests to frameless office chairs, with different prices and installation methods for different models.

Products and Prices

There are multiple products on the market for adding headrests to frameless office chairs, with prices varying based on factors such as brand and material. For example, the product from Jiangsu Jialei Home Furnishings Co., Ltd. is priced at 37.5 yuan; Lixian Lidu Textile Co., Ltd. offers a product priced at 12.5 yuan; and Anji Dipu Shunpin Furniture Business Department has a product priced at 35 yuan. Consumers can choose according to their budget and needs.

Installation Methods

The installation methods for adding headrests to frameless office chairs vary depending on the model. The following introduces the installation methods for the W6023 model and the W926 sponge model as examples:

• W6023 Model: When installing, first turn the bottom of the five-star base upwards, insert the five casters into the five-star base one by one, and then insert the thick end of the gas lift into the five-star base and press gently. Next, align the backrest with the four screw holes on the seat cushion, and secure the backrest to the seat cushion with four long screws and tighten them. Then, align the armrests with the six screw holes on the seat cushion and backrest, and secure the armrests to the seat cushion and backrest with four medium screws and two short screws, tightening them. After that, align the tray with the four screw holes on the seat cushion, secure the tray to the seat cushion with four short screws and tighten them, and then insert the gas lift into the round hole of the tray. Finally, align the headrest with the screw holes on the backrest, and secure the headrest to the backrest with two short screws and tighten them. After installation, you can adjust the seat height by moving the handle, and the headrest can be adjusted up and down and flipped.
• W926 Sponge Model: First, insert the five casters into the five-star base one by one, and then insert the thick end of the gas lift into the five-star base and press gently. Install the keel to connect the backrest with four fine medium screws, and secure the keel to the backrest and tighten the screws. Install the tray to connect the seat cushion with four fine short screws, and secure the tray to the seat cushion and tighten the screws. Install the tray to connect the keel with three thick screws and three washers, place the washers on the screws, insert them into the holes, and tighten the screws. Insert the gas lift into the round hole of the tray and press gently. Install the armrests to connect the keel with two thick screws. When sitting on the chair, install the one marked 'L' on the left armrest. First, place the washer on the screw, screw it into the hole, tighten the screw with a wrench, and then snap on the armrest cap. Do the same for the other side. Finally, install the headrest to connect the backrest with two fine long screws. First, insert the hanger into the groove of the headrest, and then secure the headrest to the backrest and tighten the screws. The headrest of this model is a 6D four-axis full-dimensional neck pillow, which can be adjusted up and down, rotated, and moved forward and backward.