Folding Office Chair Installation

The installation steps for folding office chairs are usually as follows:

Installation of the First Type of Folding Deformable Chair

1. Placement of Base Plates and Hardware Accessories: Arrange the main plates and hardware accessories of the chair properly. Locate and arrange the other half of the main plate structure neatly. Place the white hammer-head screws with the cross marks facing upwards into the pre-drilled holes, and do the same for the hammer-head screws in other positions.
2. Installation of the Left Side Wing Armrest: Install the cross braces from bottom to top, with the side featuring holes facing upwards. Secure them with 5-centimeter screws, and then install the wider cross braces.
3. Installation of the Backrest and Armrests: Flip the backrest so that the holes face downwards and install the securing screws. Then, install the other half of the armrests and secure them with screws.
4. Installation of the Other Half of the Structure: After installing half of the chair's structure, arrange the structural plates for the other half of the chair and place the hammer-head screws with the cross marks facing upwards as well. Attach the right side wing leg and connect the cross braces, securing them with screws. Install the cross braces with notches facing upwards, followed by the narrower cross braces, and secure them with screws. Cover the left chair leg with the side leg structure and secure it with screws. Arrange the hinges, place the small hinges, and secure them with small golden screws.
5. Overall Assembly and Fixation: Stand and combine the two parts of the chair. Locate the large hinges and small silver screws, place the seat, and secure it with screws. Tear off the tape, place the cross braces, lay the chair on its side, arrange the positions of the buckles, secure the left buckle with screws, and then secure the right buckle. Release the buckles, stand the chair upright and lift it upwards. At this point, install the buckles again, release them, fold the chair again, and fasten the buckles to make it more stable and secure.

Installation of the Second Type of Folding Chair

1. Installation of the Base Structure: Arrange the main structural plates of the chair properly. Attach the left side wing armrest and connect it to the wider cross braces, securing them with long screws. Then, connect the lower cross braces and secure them with screws. Connect the upper backrest plate and secure it with screws. Erect the chair frame and cover it with the right side armrest, securing it with screws.
2. Installation of the Legs and Cross Braces: Arrange the plates for the other half of the chair's structure. Attach the left side leg to the lower cross braces, securing it with long screws, and then secure the right leg with screws. Stand on one leg and install the narrow cross braces at the front, placing the side with notches facing forwards and upwards, with the front edge flush with the side plate, and secure them with long screws.
3. Installation of the Hinges and Seat: Locate the white hinges and white screws, install the hinges at the fixed positions on both sides, and secure them with screws. Install the hinges on the other side in the same manner, combine the chair, and secure the other half of the hinges again with screws. Locate the small yellow hinges, fix them to the back of the seat, and secure them with screws. Place the seat and secure it, locate the yellow screws, and secure them to the safety buckles. Install the safety buckles on the other side as well. After the chair is basically installed, open the safety buckles, flip the chair upwards to turn it into a ladder, restore it to its original shape to turn it back into a chair, and then fasten the safety buckles to make the chair more stable.