UE Office Chair Installation

The installation steps for different models of UE office chairs vary. Here are the installation methods for common models:

Yongyi UE Flow530 Ergonomic Computer Chair

Currently, there is relatively limited installation information available for this model. It is known that after opening the packaging box, there is 1 air spring, a set of 5 casters, tools, and screws inside. Due to the lack of detailed installation instructions, it is recommended to carefully check whether there is an installation manual inside the packaging box during installation and follow the instructions in the manual. If there is no manual, you can first observe the shapes and structures of the various components to initially determine their installation positions and methods. For example, the casters are usually installed on the five-star base and fixed by pressing; the air spring is generally used to connect the seat cushion and the five-star base to adjust the chair height, and attention should be paid to the installation direction and position during installation.

UE Small H Lumbar-Support Ergonomic Computer Chair

1. Open the packaging and identify the components: Open the packaging box, which contains components such as a backrest, armrests, an installation kit, a base, a five-star base, and casters.
2. Assemble the backrest and armrests: Use 4 of the 8 longest and thinnest screws to assemble the backrest and armrests. During installation, ensure that the screws are tightened to ensure the stability of the connection between the backrest and armrests.
3. Assemble the seat cushion and armrests: Align the screw holes at the bottom of the seat cushion with the screw holes below the armrests, and then tighten them with screws to connect the seat cushion and armrests together.
4. Install the adjustment module: Install the adjustment module on the seat cushion. The adjustment module is usually used to adjust functions such as the chair height and tilt. Install it in the correct direction and position during installation.
5. Install the universal wheels: Press the universal wheels onto the base to ensure that each universal wheel is firmly installed and can rotate flexibly.

Computer U-shaped Chair (Installation steps for reference)

1. Connect the backrest and seat cushion: Align the backrest with the holes below the seat cushion, connect them with 6*20 screws, and tighten them with a wrench. Use the same steps to install the chair leg brackets on the other side.
2. Install the armrest plugs: Insert the armrest plugs into the holes at the back of the armrest brackets and press them firmly to prevent them from falling off during use.
3. Connect the backrest and armrest brackets: Align the holes of the armrests with the holes on the sides of the backrest, connect them with 6*30 screws, and tighten them with a wrench. Use the same steps to connect the backrest and armrest brackets on the other side.
4. Fix the armrest covers: Fix the armrest covers on the armrest brackets to serve as protection and decoration.
5. Install the foot pads: Turn the chair over and insert the protruding parts on the inside of the foot pads into the holes of the chair leg brackets.