Tongzhou Office Chair Installation

For office chair installation in Tongzhou, you can refer to the general installation steps for office chairs or contact professional technicians through platforms like 58.com for on-site installation. Here are the specific installation steps and precautions:

Installation Steps

1. Install Casters and Chair Legs

   • For regular office chairs: Install the casters one by one onto the chair legs. After completion, place the gas lift vertically into the center of the chair legs.
   • For five-star base office chairs: Insert the wheels into the five-star base (some may need to be screwed in). Press firmly to ensure they are secure. After flipping the five-star base, remove the gas lift cap and place the gas lift into the center hole.

2. Install the Base and Seat

   • Use screws to fix the base to the bottom of the seat. Pay attention to the direction of the base (usually marked) and ensure the screws are tightened to prevent loosening.

3. Connect the Backrest and Seat

   • Connect the backrest and seat using the preset clips or screws to form the main structure of the upper part of the chair.

4. Install the Gas Lift and Base Assembly

   • For regular office chairs: Vertically insert the seat (with the backrest) onto the gas lift.
   • For five-star base office chairs: Align the cushion with the top of the gas lift, insert it into the base hole, and press lightly to secure it.

5. Install Armrests and Headrests

   • For five-star base office chairs, follow these steps:
     • Armrest installation: First, fix the bottom screws (do not tighten them completely) to allow for adjustment space.
     • Backrest installation: Align with the armrest holes, fix the bottom screws, lift the backrest, install the top screws, and finally tighten all the screws and attach the decorative caps.
   • For regular office chairs: Fix the armrests and headrests directly using screws or clips.

Precautions

1. Pre-installation Inspection

   • Ensure the outer packaging is intact and verify that the product model and color match the order.
   • Measure the dimensions of door frames, elevators, and hallways to avoid difficulties in moving the chair.
   • Check for pre-installed water and electrical pipes in the walls to prevent damage during installation.

2. Protection During Installation

   • Lay soft mats or cardboard on the floor to prevent scratches.
   • Store small parts (such as screws and washers) separately to avoid loss.

3. Post-installation Inspection

   • Check the structural stability: Shake the chair to ensure there is no looseness or abnormal noise.
   • Test the functions: Adjust the height of the gas lift, the angle of the armrests, and the position of the headrest.
   • Ventilate: If the chair is made of leather or plastic, open the windows for 1-2 hours of ventilation before use.

If you are unfamiliar with the installation steps, it is recommended to contact local professional technicians in Tongzhou through platforms like 58.com to save time and ensure installation quality.