Qujing Swivel Office Chair

A swivel office chair typically refers to a chair with rolling wheels, and its structure and disassembly method can be referred to the following content:

The swivel office chair is a type of swivel chair, and its core structure usually includes a headrest, backrest, seat, armrests, gas lift support, swivel mechanism, and a five-star base with wheels. The headrest supports the neck, while the backrest and seat provide support for the body in a sitting position. The gas lift support allows for height adjustment of the seat, the swivel mechanism enables the backrest and seat to rotate together or independently, and the five-star base with wheels provides flexible mobility. This design takes into account both ergonomic needs and the convenience of office scenarios, making it widely used in modern offices, conference rooms, and other places.

If you need to disassemble a swivel office chair, follow these steps: Step 1: Separate the seat from the leg frame Turn the office chair upside down so that the bottom faces up. Use a screwdriver or power tool to loosen the fixing screws under the seat. These screws usually connect the seat to the leg frame (i.e., the base with wheels). Once loosened, the entire seat can be separated from the leg frame and armrests. Be sure to keep the removed screws to avoid losing them.

Step 2: Remove the armrests If the armrests are designed to be removable, further loosen the fixing screws under the armrests. These screws may be located at the connection between the armrests and the seat or hidden under decorative covers on the sides of the armrests. After removal, the armrests can be taken off separately for subsequent operations or transportation.

Step 3: Separate the leg frame from the wheels Place the leg frame (base with wheels) with the wheel side facing up. Use a wrench or pliers to unscrew the nut in the center of the leg frame. This nut usually fixes the wheel axle to the leg frame. Once loosened, the leg frame can be separated from the wheel axle. At this point, the base with wheels and the wheel axle become independent components.

Step 4: Remove the wheels Turn the office chair completely upside down so that the wheel axle faces up. Use a wrench or a special tool to turn the large nut at the bottom of the wheel axle. This nut fixes the wheels to the axle. Once loosened, the wheels can slide off along the axle. If the wheels are stuck due to long-term use, you can spray some lubricant to assist with the removal.

Precautions:

1. Clear the area around the seat before disassembly to prevent tools or parts from falling and causing damage.
2. It is recommended to wear gloves during operation to prevent metal parts from scratching your hands.
3. If the gas lift support needs to be removed, use a special gas lift removal tool to avoid the risk of the gas lift exploding from direct hammering.
4. When reassembling, follow the reverse order of disassembly and ensure that all screws are tightened to the specified torque.