Office Chair Wheels Are Stuck and Solutions

If the wheels of an office chair are stuck and immobile, you can choose a fixing solution according to your needs; if the wheels are stuck and won't turn, you need to check for foreign objects, damage, axle issues, or floor factors.

Solutions for Stuck Wheels

1. Use Chair Fixing Feet
   By installing fixing feet, the chair can be completely stationary, suitable for scenarios with extremely high stability requirements (such as drawing or precision operations). However, after installation, the chair needs to have the fixing feet removed to be moved, resulting in relatively low flexibility.

2. Choose Wheels with Brake Function
   These types of wheels can be locked/unlocked via side buttons. For example, soft PU wheels with a diameter of 60 millimeters are available in black and gray options, and the 65-millimeter specification comes in white and black. When operating, all five wheels need to be locked simultaneously, suitable for scenarios that require intermittent fixing.

3. Use Gravity Self-Locking Wheels
   Utilizing the principle of gravity, the wheels automatically lock when a person sits down and unlock when they stand up. For example, 60-millimeter gravity wheels increase lateral resistance through internal mechanisms, making little noise and having moderate resistance during movement, balancing safety and convenience.

4. Lay Rough Carpets
   By increasing the friction between the wheels and the floor to limit sliding, this method is suitable for scenarios with low fixing requirements. This approach does not require modifying the chair but cannot completely prevent movement.

Troubleshooting Methods for Stuck Wheels That Won't Turn

1. Clean Foreign Objects
   Check around the wheels for paper scraps, hair, or threads, and clean them with tweezers or small tools. Foreign object intrusion is a common cause of wheel jamming.

2. Replace Damaged Wheels
   If the rubber part of the wheels is severely worn or has cracks, new wheels need to be replaced. Damaged wheels cannot provide the friction and structural integrity required for normal rolling.

3. Address Axle Issues
   Check if the wheel axle is loose or rusty. Tighten the screws if it is loose; if it is rusty, spray rust remover to remove the rust and then drip lubricating oil to restore rotational flexibility.

4. Adjust the Floor Environment
   Move the chair to a flat and smooth floor. An uneven or overly frictional floor can hinder wheel rotation, especially on carpets or uneven tile surfaces.