Office Chair Tires

There are various types of office chair wheels, with common ones being plug-in wheels and screw wheels, and prices vary depending on specifications and materials.

Wheel Types

• Plug-in Wheels: These wheels are relatively easy to disassemble. Usually, they can be pulled out directly by hand. If it is difficult to pull out due to insufficient strength, tools can be used. Clamp the rod with pliers and then gently tap it with a hammer to disassemble it relatively easily. This design makes it convenient to replace and clean the wheels.
• Screw Wheels: The installation and disassembly of screw wheels require tools such as screwdrivers. The wheels are fixed or removed by rotating the screws. Compared with plug-in wheels, screw wheels are more firmly installed and are less likely to have the wheels loosen and fall off during normal use, but they are relatively more troublesome to disassemble.

Price Information

The prices of office chair wheels vary depending on different specifications and materials.

• The 1.4-inch load-bearing caster with a snap-ring threaded universal wheel produced by Cixi Zhongyang Electrical Appliance Co., Ltd. is priced at ¥1.36. This wheel is relatively small in size and may be suitable for office chairs with relatively low load-bearing requirements and limited space.
• The 1.5-inch wear-resistant caster universal wheel customized by Waoh is priced at ¥3.8. This wheel emphasizes wear resistance and is suitable for use in environments with high ground friction, which can extend the service life of the wheels.
• The 2-inch plug-in flat caster sliding wheel customized by Waoh is priced at ¥3.1. The 2-inch size is relatively moderate, the plug-in design is convenient for disassembly, and the flat shape may provide more stable movement.
• The 2-inch universal wheel office chair caster produced by Lufeng Jiazi Mingchen Hardware Furniture Accessories Factory is priced at ¥1.45. The price is relatively affordable and can meet the basic usage requirements of general office chairs.
• The 2-inch fixed caster for swivel chairs produced by Foshan Junyuewei Hardware and Plastic Products Co., Ltd. is priced at ¥1.71. A fixed caster means that the direction of the office chair is relatively fixed during movement and is suitable for scenarios where frequent direction changes are not required.