Office Chair Repair Video

For issues with a 'broken office chair,' you can refer to the following repair or adjustment videos for solutions, selecting the appropriate method based on the type of fault:

1. Repairing an Office Chair That Won't Adjust in Height If the hydraulic rod of the office chair fails and it cannot adjust in height, it can be repaired by replacing the gas rod. Steps include:

• Invert the chair and shake the seat to loosen the gas rod from the base;
• Use a rubber mallet to tap around the gas rod to assist in removing the old rod;
• When installing the new gas rod, ensure the connectors are aligned to prevent air leaks;
• Test if the height adjustment function works properly, noting that the gas rod must match the chair's weight capacity. Safety precautions are necessary for this repair to avoid injury from the sudden ejection of the gas rod; wearing protective gloves is recommended.

2. Adjusting an Office Chair with a Malfunctioning Recline If the recline function fails, it may be due to the recline lock being accidentally triggered. Solution:

• Locate the recline adjustment button (usually a toggle or knob) on the bottom or side of the chair;
• Move the button in the unlocking direction (some models may require simultaneous application of recline force);
• Test if the recline function is restored; if not, check for damage to internal springs or connectors. This issue is often caused by improper operation; after adjustment, avoid pressing the button with excessive force.

3. Repairing Leather Damage on an Office Chair If the leather on the chair's surface is cracked or peeling, it can be repaired with specialized glue. Steps include:

• Clean the damaged area to remove dust and old glue residue;
• Apply leather-specific glue (such as polyurethane glue) evenly on both sides of the crack;
• Press the crack together and secure it for 10-15 minutes until the glue is fully cured;
• If the damage is large, attach non-woven fabric inside to reinforce the load-bearing capacity. After repair, avoid friction or moisture for a short time, as this may affect the glue's adhesion.

4. Reference for Structural Durability Testing of Office Chairs If you need to evaluate the chair's quality or understand the limits of its components, refer to the destructive testing video of the GD-GP-02 swivel chair. This video demonstrates its load-bearing capacity and material strength through extreme tests such as car碾压 (car crushing) of the five-star base and heavy impacts on the casters. Such tests are only for understanding product durability; do not imitate in daily use.

Precautions:

• Before repair, confirm the chair model and the cause of the fault to avoid misoperation;
• For complex faults (such as air leaks in the gas rod or internal structural breaks), it is recommended to contact professional repair personnel;
• Regularly check if the chair's screws are loose to extend its service life.