Office Chair and Rattan Chair Repair

Office chair and rattan chair repair can be carried out separately for damage to the wooden frame and the rattan surface, as follows:

If the wooden frame of the rattan chair is damaged, such as being torn or the support rods being broken, priority should be given to finding original factory parts for replacement during repair. If the product has been discontinued or parts cannot be obtained, bamboo can be considered as an alternative material. When selecting bamboo, note that its diameter should match that of the original support rods. Additionally, the surface of the bamboo should be treated in advance to remove burrs and be polished smooth to avoid scratching the rattan surface or the user. When splitting bamboo, use professional tools (such as a bamboo splitting knife) to split it longitudinally along the bamboo joints, ensuring a flat cut. If the damaged part is a non-load-bearing structure (such as a decorative crossbar), woodworking glue can also be used to bond the broken parts, and clamps should be used to fix them until the glue is completely dry. However, this method is only suitable for minor cracks and is not recommended for load-bearing parts.

Rattan surface repair should be selected according to the degree of damage. If the rattan surface is locally sunken or the rattan strips are broken, the damaged parts should be cut off first, retaining intact rattan strips as a weaving reference. During repair, prepare new rattan strips similar in thickness and material to the original ones (the length should be determined according to the extent of the damage; for example, the 21 meters mentioned in the reference information is for illustration purposes, and actual measurement is required). Thread them in from the bottom or edge of the rattan chair where there is no damage, and gradually repair them using the classic “over-under” weaving method (i.e., the new rattan strips alternately pass over and under the existing rattan strips). During the weaving process, keep the tension of the rattan strips uniform to avoid local tightness causing deformation. If the rattan surface is largely loose or aged, the original rattan strips should be completely removed, and a new surface should be woven. At this time, the frame of the rattan chair should be fixed first, with clips or heavy objects used to press down the edge rattan strips. Weave from the center outward, and gently tap each row with a wooden mallet to adjust the tightness and ensure overall flatness.

After repair, check the stability: gently shake the rattan chair to test whether the wooden frame structure is firm, and press the rattan surface with your hand to check the weaving tightness. If bamboo is used as a substitute for wood, regularly check whether the bamboo is cracked or infested with insects; after rattan surface repair, avoid direct sunlight or humid environments to extend the service life.