Back to blog
Article

Office Chair Packing Video

Admin October 11, 2026

The 'Miduomaisi Furniture President Chair Disassembly and Packing Video' provides a detailed process for disassembling and packing office chairs, with the following steps:

First, preparation is crucial. Before starting to disassemble the office chair, put a protective bag over the chair. The main purpose of this step is to prevent the leather surface of the chair from being scratched during subsequent disassembly and handling, ensuring that the chair's appearance remains intact. The protective bag should be chosen to fit the size and shape of the chair as closely as possible, ensuring comprehensive coverage of the chair's surface.

Next, disassemble the pneumatic rod. Lay the chair face down on the ground, which positions the pneumatic rod for easy operation. Then, use a hammer to tap the bottom edge of the pneumatic rod. Be mindful of the force applied when tapping to avoid damaging the pneumatic rod or causing injury to other parts of the chair due to excessive force. By tapping, the connection between the pneumatic rod and the chair body can be loosened, allowing for smooth disassembly.

After that, remove the casters. Step on the hardware base frame with your foot to provide stable support. Then, pull the casters upward with force. Since the casters are usually connected to the base frame through clips or other means, the clips will loosen during the pulling process, allowing the casters to be removed. When removing the casters, be sure to maintain your balance to avoid falling due to uneven force application.

Finally, pack all the accessories. Wrap the disassembled accessories such as the pneumatic rod and casters separately with appropriate packaging materials. Packaging materials like foam paper or bubble wrap can be chosen, as they have good cushioning properties and can effectively prevent the accessories from being damaged by collisions during transportation. At the same time, place the packaged accessories together with the chair body for convenient subsequent assembly and use.