Homemade Office Chair Headrest

Making an office chair headrest can be achieved through three methods: eco-friendly DIY floral, simple small headrest, and headrest with armrests. Here are the specific steps:

I. Eco-friendly DIY Floral Headrest

1. Materials Preparation: Old clothes or scraps of fabric (two different patterns required), paper, needle and thread, iron.
2. Making Steps:
   • Cutting Fabric: Draw a circle with a diameter of about 15 centimeters on paper, place the template on the two types of fabric, and cut out 10 circular pieces of fabric from each.
   • Processing Single Fabric Piece: Sew two pieces of fabric with their right sides facing each other (hand-sew if no machine is available), leaving a 1-centimeter seam unsewn; turn it right side out through the seam opening, adjust the fabric folds with your fingers to make the edges fold outward on both sides, forming a petal shape.
   • Assembling Petals: Sew the 10 processed fabric pieces together one by one to form a petal shape; use a needle and thread to secure the center points of all the petals, and finally iron them flat.
   • Combining Headrest: Sew the petal pad onto a pre-made round or square pillow to complete the making. Key Points: The fabric folding should be meticulous to ensure the petals are full in shape; pay attention to even stitching when assembling to avoid affecting the appearance.

II. Simple Small Headrest

1. Materials Preparation: Unworn clothes, idle fabric, needle and thread.
2. Making Steps:
   • Folding Fabric: Fold the fabric in half, then overlap a third piece of fabric, press a 1-centimeter seam, and sew.
   • Filling Inner Core: Turn the sewn fabric right side out, stuff it with old clothes or idle fabric as filling, adjust to a comfortable thickness, and then close the opening. Key Points: The seam should be firm to prevent the filling from leaking out; the filling can be made of soft clothes to enhance the comfort of the headrest.

III. Headrest with Armrests

1. Materials Preparation: Fabric, cotton, zipper (optional), needle and thread, template (requires 15 A4 papers to be pieced together or drawn by yourself).
2. Making Steps:
   • Cutting Fabric:
     • Front of headrest: Fold a piece of fabric in half and cut.
     • Back of headrest: Fold a piece of fabric in half and cut, adding darts at the abdominal corners (fold and sew the fabric to fit the body curve).
     • Armrest components: Including side trim, wide edge, edge strip, etc., which need to be cut according to the template, with the edge strip reserved with a length of 12 centimeters.
   • Sewing Components:
     • Sewing armrest side to back: With the arc facing up, sew the right sides together and then turn it to the back, secure the edge strip with stitching, and cut off the excess.
     • Sewing armrest to front: Sew the two arcs with the right sides facing each other.
     • Sewing darts on back: Sew the two darts, and then sew the front and back together with the right sides facing each other all around.
   • Installing Zipper: If the cotton filling needs to be firm, place the zipper at the top; if there are no special requirements, it can be placed at the bottom. Sew the zipper first, and then sew the other positions.
   • Filling Cotton: After sewing, trim the edges and corners, turn it right side out, stuff it with 3-4 jin of cotton, adjust it evenly, and then close the opening. Key Points: The sewing of darts should be precise to ensure the headrest fits the body; the installation position of the zipper affects the user experience and should be chosen according to needs.