Easy Installation of Office Chairs

The easy installation of office chairs can be carried out according to general steps, and for some special models, refer to their specific installation procedures as follows:

General Installation Steps

1. Install the wheels: Attach the five wheels to the chair legs respectively. Ensure that the wheels are firmly installed and can rotate flexibly. Wheels are crucial components for the mobility of office chairs. When installing, pay attention to aligning them with the installation holes on the chair legs and press evenly to avoid looseness or improper installation.
2. Install the gas lift: Insert or place the gas lift (pneumatic rod) into the central hole of the chair. The gas lift is an important part for adjusting the height of the office chair. During installation, ensure a tight fit between the gas lift and the central hole without any wobbling.
3. Install the base: Place the base under the seat plate and fix it with four long screws. The base is an important structure that supports the seat plate and connects other components. When installing, make sure the screws are tightened to ensure a firm connection between the base and the seat plate.
4. Fix the backrest and the seat: Secure the backrest and the seat plate with screws through the connecting angle brackets. Pay attention to the installation direction, for example, install according to the direction of the black fabric on the back. At this step, ensure a firm connection between the backrest and the seat plate, tighten the screws to prevent looseness or wobbling during use.

TOAI E1 Office Chair Installation Steps

1. First, press the wheels into the chair legs and place the pneumatic rod into the central hole.
2. Take out the seat cushion and the backrest and connect them. Fix the backrest with three M8 screws and tighten them to ensure a firm connection between the backrest and the seat cushion.
3. Connect the armrests to the seat cushion. Flip the chair seat to fix the other armrest, ensuring that the armrests are firmly installed and can be used normally.
4. Take the footrest, insert it into the hole under the seat cushion, paying attention to the insertion direction and depth to ensure a firm installation of the footrest.
5. Align the pneumatic rod with the base and insert it. Finally, insert the headrest into the backrest to complete the installation of the entire office chair.

Deli Office Chair Installation Steps

1. Install the ball bearings by pressing them in. Ensure that the ball bearings are properly installed and can roll flexibly.
2. Place the bottom of the seat properly, push the screws up, and then place them on top. Pay attention to aligning with the indicator arrows and install some screws first to provide initial fixation for subsequent installation.
3. When installing the backrest, slightly bend the connection part to make it movable, and then install the screws to ensure a firm connection between the backrest and the seat.
4. Finally, install the decorative cover to make the office chair more aesthetically pleasing.