Office Chair and Boss Chair Repair

The repair of office chairs and boss chairs requires selecting targeted methods based on specific issues. Common repair methods are as follows:

I. Repair of Wooden Boss Stools For cracks in wooden boss stools, first remove the wedges and clean the basic hygiene. Then, squeeze woodworking glue into the cracks. If the gap is small, use a mouthpiece or straw to assist in applying the glue to ensure full penetration. Clamp and hold until the glue beads seep out, then wipe off the spilled glue and let it stand for 24 hours until the glue reaches its maximum strength. If reinforcement is needed, a butterfly key can be made: determine the size according to the crack, drill a large hole, chisel out a groove and smooth it, apply glue, and hammer in the butterfly key, repairing the bottom simultaneously. After the glue dries, remove the clamping tools and sand the surface until smooth. If the tenon of the stool leg is deformed, it can be repaired by filling with quick-drying glue mixed with sawdust and driving in wedges at the gaps and leveling them.

II. Repair of Tilted Office Chairs

1. Wheel Inspection and Replacement: Place the chair upright and upside down to observe whether the wheel feet are in even contact with the ground. If the wheels are damaged, purchase new wheels of the matching model. To remove the old wheels, simply pull them out; if stuck, use a flat-head screwdriver to assist; for a very few that are fixed with screws, loosen the screws to remove them.
2. Base Lubrication and Installation: Apply a small amount of spray lubricant (such as WD-40) or a pea-sized amount of petroleum jelly to the chair base socket. Use a rubber mallet to hammer the new wheels into the socket. Invert the chair to test the wheel flexibility. If it is still tilted, further inspect the seat plate.

III. Repair of Leather Boss Chairs For leather boss chairs with slight wear on the back, first clean the damaged area with a multi-functional cleaner to remove stains and aged cuticles, providing a clean base for subsequent repairs. If the wear is deep, use leather repair paste to fill the depressions and then use leather dye for color repair.

IV. Professional Repair Services Shanghai Changfa Automatic Door Access Control System Installation and Repair Company provides comprehensive repair services for office swivel chairs and boss chairs, including replacing accessories such as casters, air pressure pumps, armrests, and five-legged claws, as well as repairing office desk locks and drawer slides. The repair price is negotiable based on the amount of accessories used. The company can undertake long-term services for enterprises and institutions and sign contracts.