Office Chair Base Diagram Explanation
There is no direct diagram explanation for the office chair base at present, but the disassembly steps of the office chair base can be provided as a reference.
There are usually two common methods for disassembling the office chair base. Here is a detailed introduction for you:
Method 1: Regular Disassembly Method First, separate the backrest from the base. This step requires careful observation of the connection part between the backrest and the base, which is usually fixed by screws or buckles. If it is fixed by screws, use an appropriate screwdriver to unscrew the screws one by one; if it is connected by buckles, find the position of the buckles and loosen them by pressing or prying, so as to separate the backrest from the base. Next, raise the pneumatic rod to its highest position. The pneumatic rod is a key component for the height adjustment of the office chair. Raising it to the highest position can provide more operating space for the subsequent disassembly of the base. Then, hold the seat cushion tightly with one hand and press the height adjustment lever with the other hand. While pressing the height adjustment lever, gently shake the base several times. Through this operation, the connection between the base and the pneumatic rod as well as other components can be gradually loosened, and finally the base can be removed.
Method 2: Inverted Knocking Method Turn the computer lifting chair upside down as a whole and place it on a stable surface. This is to facilitate operations on the bottom of the base. Prepare a rubber hammer and knock hard along the steel ring at the bottom of the base. The elasticity of the rubber hammer can avoid damaging the base while providing sufficient impact force. The purpose of knocking is to loosen the connection between the base and the internal components. After knocking around, try to pry the base. If the base still cannot be removed, don't worry. Continue to repeat the knocking and prying operations until the base can be removed smoothly. During the operation, pay attention to applying an appropriate amount of force to avoid damaging other components of the office chair due to excessive force.
