Office Chair Armrest Fixation

The fixation methods for the armrests of different models of office chairs vary. Here are the fixation methods for common models:

For the 099 Star Track Chair, to fix its armrests, you first need to remove the seat cushion. After taking out the seat cushion, locate the six pre-installed screws at the marked positions and use appropriate tools to unscrew them. Then, take out the left and right armrests and carefully align them with the corresponding holes on the seat cushion to ensure an accurate match between the armrests and the seat cushion. After that, reinstall the six pre-installed screws that were just removed and tighten them one by one to firmly fix the armrests to the seat cushion. When screwing, pay attention to applying an appropriate amount of force to avoid screw slippage or component damage due to excessive force, while also ensuring that the screws are tightened to prevent the armrests from becoming loose during use.

The fixation method for the GF - 23(9d armrest) is relatively simple. Prepare four long screws, place the armrests in the appropriate positions on the seat cushion, and ensure that the contact surfaces between the armrests and the seat cushion are flat and well-fitted. Then, use tools such as a screwdriver to pass these four long screws through the corresponding holes on the armrests and the seat cushion one by one and tighten the screws to closely connect the armrests and the seat cushion. During the installation process, make sure that all the screws are tightened to ensure the stability of the armrests and prevent them from wobbling during use.

For the G101 model of office chair, when fixing the armrests, first place the armrests in the corresponding positions on the seat cushion assembly, adjust the angles and positions of the armrests to meet the usage requirements. Then, use screws (a total of six) to fix the armrests to the seat cushion assembly. When screwing, follow a certain order. First, preliminarily tighten each screw, and then tighten each screw to an appropriate degree one by one to ensure that the armrests are firmly installed and will not become loose or shift during use.