Novo Office Chair Installation

If the 'novo office chair' being installed is actually the 'ENOVA Fashion Home Youth Edition', you can watch the complete installation tutorial for the Enova Fashion Home Ergonomic Chair, which provides step-by-step instructions for assembling components such as the base, armrests, chair legs, headrest, backrest, and footrest.

For a regular novo office chair, follow these installation steps: Step 1: Inventory the Parts Before installation, carefully inventory all parts to ensure completeness. The components of a regular novo office chair typically include: 5 casters, 1 pneumatic lift rod, 1 five-star base, 1 control mechanism tray, and 1 seat. If any parts are missing or damaged, contact the merchant promptly for replacements to avoid delays in the installation process.

Step 2: Install the Tray Turn the chair upside down for easier access. First, remove the fixing screws from the bottom of the seat, usually located at the center or preset mounting holes on the edges. After removing the screws, align the control mechanism tray with the mounting holes on the bottom of the seat, reinsert the screws, and tighten them to ensure a secure connection between the tray and the seat, with no looseness or wobbling.

Step 3: Install the Casters Attach each of the five casters to the five ends of the five-star base. The casters are typically designed with a snap-fit mechanism. Simply align the caster slots with the ends of the five-star base and press firmly until you hear a 'click' sound, indicating that the casters are securely fastened. After installation, check each caster for stability by gently shaking the five-star base to observe if any casters come loose or fall off.

Step 4: Connect the Pneumatic Lift Rod to the Seat Place the five-star base upright on a flat surface, ensuring there are no obstructions or unevenness. Align the thicker end of the pneumatic lift rod with the hole in the center of the five-star base, insert it vertically, and rotate gently to ensure a tight connection between the lift rod and the base. Then, align the seat with the installed tray with the upper end of the pneumatic lift rod, lower it slowly, and adjust the position to ensure a complete fit between the seat and the lift rod.

Step 5: Check Safety and Functionality After installation, perform a functionality test. First, sit on the chair to assess its stability, ensuring there is no wobbling or unusual noise. Then, grasp the handle of the control mechanism tray and press it up and down to test if the lift function operates normally, with a smooth and uninterrupted lifting process. If any abnormalities are detected, recheck the installation of each component to ensure proper assembly.