Nankang Office Chair Installation

The installation of Nankang office chairs requires selecting the appropriate method based on the specific model. The installation steps for common models are as follows:

I. Installation of the 'G41 Nankang - Lingzhi Chair PLUS'

1. Prepare materials: You will need two frames (one with the notch facing upwards), a back panel, a seat panel, two triangular plates, and 10 screws (8 for the triangular plates with washers and 2 for the backrest).
2. Assemble the frames: Place the two frames according to the design requirements, ensuring that one notch faces upwards to serve as the supporting structure for subsequent components.
3. Secure the triangular plates: Use 8 screws to fix the two triangular plates on both sides of the frames respectively. Each screw should be paired with a washer to enhance stability and prevent loosening.
4. Install the back and seat panels: Align the back and seat panels with the corresponding slots or holes on the frames to ensure a tight and seamless connection.
5. Fix the backrest: Use the remaining 2 screws to fix the backrest at the rear of the frames. Tighten the screws to ensure that the back panel is stable and does not wobble.

II. Installation of a regular five-star-base office chair

1. Install the wheels and five-star base: Insert the wheels into the five holes on the five-star base. Press down slightly or twist them in to ensure a firm connection between the wheels and the five-star base.
2. Place the gas lift: Turn over the five-star base and place the gas lift into the central hole. Before installation, remove the protective cap at the top of the gas lift to avoid affecting its lifting function.
3. Secure the base and seat cushion: Place the seat cushion flat on a clean floor. Align the base with the installation holes at the bottom of the seat cushion and tighten it with screws to ensure a firm connection between the base and the seat cushion.
4. Connect the gas lift and seat cushion: Align the hole on the base at the bottom of the seat cushion with the top of the gas lift. Press down vertically to insert the gas lift into the base, ensuring that the seat cushion can move up and down freely.
5. Install the armrests: According to the front-back-left-right directions marked on the armrests, align them with the installation holes on both sides of the seat cushion and fix them with screws. Pay attention to adjusting the height and angle of the armrests to be consistent.
6. Fix the backrest: Align the bottom of the backrest with the connection holes between the armrests and the seat cushion. First, install the bottom screws (do not tighten them yet), then install the top screws, and finally tighten all the screws to ensure that the backrest is vertical and does not tilt.
7. Decorative finishing touches: Install the armrest decorative caps to cover the screw holes and enhance the overall aesthetic appeal, completing the installation.

III. Other considerations If you find it difficult to install the chair by yourself, you can contact furniture installation service providers in the Nankang District of Ganzhou. They can offer professional installation services through merchants or individuals to ensure safety and comfort during use.