Muji Office Chair Disassembly

The disassembly of Muji office chairs can refer to the general disassembly methods for office chairs. The specific steps are as follows:

Seat Disassembly

First, flip the chair so that the seat faces down. Carefully locate the positions of the screws securing the seat. Use a wrench or other appropriate tool of the correct size to slowly loosen the screws. Then, remove the base from the chair, and the seat can be freely disassembled. For some chairs where the seat cushion and the backrest are fixed together, you need to disassemble the backrest first before further disassembling the seat.

Backrest Disassembly

Find the screws around the backrest and use a wrench or other tools to loosen them, thereby removing the backrest from the seat. For office chairs with gas cylinders, locate the adjustment screws connecting the seat cushion and the backrest underneath the cushion. Loosen these screws to separate the cushion. Then, go to the connection point between the backrest and the base adjustment rod and unscrew the fixing screws to remove the backrest.

Armrest Disassembly

Armrests are usually screwed onto the armrest frames. Use a wrench to unscrew or a screwdriver to remove the screws on the armrest frames, and then the armrests can be disassembled.

Leg Disassembly

First, determine the connection method between the chair legs and the chair base. The common methods are threaded and snap-fit. If it is a threaded connection, use a wrench or a wrench plier to unscrew the nuts at the connection points of the chair legs and remove the legs. If it is a snap-fit connection, lift the chair legs upwards while pressing the snap-fit buttons to complete the disassembly. For office chairs with gas cylinders, at the connection point between the five-star base and the gas cylinder, use a wrench to unscrew the bolts and separate the casters from the chair legs.

Wheel Disassembly

Flip the chair so that it faces down. Locate the fixing screws of the wheels and use a wrench or other tools to loosen them. Then, gently push the wheels with your hands until they can be easily disassembled.

Precautions: Be careful during the disassembly process to avoid damaging the chair or injuring yourself. When using a wrench, control the force to prevent scratching the screw heads or damaging the footrest. If the parts are difficult to disassemble, you can apply a small amount of oil appropriately, but be careful not to use too much to avoid contaminating the floor or making the chair slip. Keep small parts such as screws in small containers to prevent loss.