Luban At Home Office Chair

The following is an introduction to the installation and height adjustment methods of office chairs provided by Luban At Home:

Office Chair Installation Steps

• Caster Installation: Insert each caster into the mounting holes of the five-star base one by one. Ensure that each caster is firmly installed to prevent loosening or detachment during subsequent use.
• Five-Star Base Flipping: After completing the caster installation, flip the five-star base to place it in the appropriate installation position, preparing for the installation of other components.
• Gas Cylinder Installation: Install the gas cylinder onto the five-star base. The gas cylinder is a key component for the office chair's height adjustment function. Ensure a tight and stable connection between the gas cylinder and the five-star base during installation.
• Base and Seat Cushion Installation: Place the base on the seat cushion and then secure it with screws. When tightening the screws, ensure that the force is moderate to prevent the screws from loosening or damaging the seat cushion and base.
• Seat Cushion Insertion: Insert the seat cushion with the installed base onto the gas cylinder. Ensure that it is inserted properly so that the seat cushion and gas cylinder can work together normally.
• Backrest Installation: Install the backrest onto the seat cushion. Depending on the design of the backrest, screws or other fastening methods may be required for connection. After installation, check the stability of the backrest.
• Armrest Fixing: Install the armrests on both sides of the seat cushion and secure them firmly with screws or other fastening devices to ensure that the armrests do not wobble during use.
• Headrest Insertion: If the office chair is equipped with a headrest, insert the headrest into the corresponding position on the backrest to complete the installation of the entire office chair.

Office Chair Height Adjustment Methods

• Adjustment via the Handle under the Seat: Some office chairs have a handle under the seat. By pulling the handle up or down, you can adjust the height of the chair. This operation is convenient and quick.
• Adjustment via Fixed Screws: Some office chairs use fixed screws for height adjustment. You need to use a tool to loosen the screws, adjust to the appropriate height, and then tighten the screws to ensure that the chair height is fixed.
• Adjustment via an Adjustment Lever: Some office chairs are equipped with an adjustment lever. By pressing or rotating the adjustment lever, you can change the height of the chair to meet the needs of different users. When adjusting, make reasonable adjustments according to the height of the desk and chair as well as your own height to ensure a good sitting posture and avoid physical fatigue or injury caused by improper sitting posture.