Jieshou Office Chair Repair
In Jieshou, if your office chair is damaged, you can try DIY repairs. If you have no experience, it is recommended to contact a professional repair service. Here are specific repair methods and suggestions:
Broken wheels: If the wheels of your office chair are damaged, you need to prepare tools such as a wrench first. Turn the chair over so that the base faces up, and use the wrench to remove the broken wheels from the base. Remember to note down the wheel model to ensure the new wheels match. When installing the new wheels, align them with the base holes, press or rotate firmly to secure them. After installation, manually rotate the wheels to check if they are installed properly and can rotate flexibly.
Loose chair back: When the chair back is loose, use a wrench to remove the loose chair back as well. Apply an appropriate amount of wood glue evenly at the end of the chair back. Be careful not to use too much glue to avoid overflow. Reinstall the chair back onto the seat and press it firmly to ensure the glue makes full contact and bonds. Wait for the glue to dry completely, which usually takes several hours to a day. Refer to the glue instructions for the specific drying time, and you can use it normally after it dries.
Broken armrests: For broken armrests, first remove the broken parts. Use strong glue, such as AB glue, to apply it evenly to the broken area, and then quickly align and bond the broken parts. Use clamps to apply even pressure to the broken area to ensure a tight bond. Let it sit in a dry environment for at least 24 hours to allow the glue to fully cure, and then reinstall the repaired armrests back onto the chair.
Damaged seat cushion: If the fabric of the seat cushion is damaged, use scissors to trim off the damaged fabric. Be careful not to damage the underlying sponge or filling. Select fabric similar to the original material or use a sewing machine to mend the damaged area. Reinstall the repaired seat cushion onto the chair to ensure it is firmly attached.
Unable to keep the seat back upright due to hydraulic system issues: If the backrest cannot stand upright due to hydraulic system problems, lay the chair on its side and check the transmission components. If you find that the fixed screw at the pivot point is damaged, you can use a standard No. 10 screw as a replacement. When installing, pay attention to the screw length to ensure it does not affect the movement range of the hydraulic rod. If the screw length is not appropriate, you can solve the problem by adding washers.
If you have no DIY experience, it is recommended to contact a professional repair service, such as Jieshou Chuangxin Keyuan Office Equipment Business Department. Its business scope includes the sales and repair of office equipment and can provide professional repair services.
