How to Install Swivel Office Chair Video
For the installation of swivel office chairs, you can refer to the following video tutorials and steps:
Jinyexing A - 10 Swivel Chair Installation Video: This video provides a detailed demonstration of the installation process for the Jinyexing A - 10 swivel chair. First, install the legs, preparing relevant accessories such as short screws. Then, install the universal wheels, securing them to the five-star base to ensure a firm installation. Next, install the backrest, using appropriate screws for fixation. After that, install the headrest and adjust it to the proper position. Then, install the armrest covers, paying attention to the tightness of the screws. The entire installation process should be carried out step by step in order, ensuring that each component is properly installed to avoid looseness or installation errors.
One-Click Swivel Seat Installation Video: This video introduces the product components, including screw accessories, footrests and columns, seats, armrests, etc. The installation steps are as follows: First, put washers on four screws to increase their stability and prevent loosening. Then, align the four screw holes on the column with the screws on the seat and slowly tighten them, ensuring an even force to make the column and the seat tightly connected. Next, install the footrest and fix it to the column. Finally, install the armrests, adjust them to the proper position, and secure them with screws. During the installation process, carefully check the installation of each component to ensure there are no omissions or errors.
Swivel Chair Model Installation Video 1 - 21: After receiving the product, you can complete the installation in five steps following the video. Step 1: Take out the accessories, including universal joints, shoe-shaped mouse holder accessory packs, fixed bracket accessory packs, screwdrivers and wrenches, movable brackets, C-shaped fixing plates, and small shaft liners, etc. Step 2: Use screws and nuts to fix relevant components, paying attention to the matching of screws and nuts and the degree of tightening. Step 3: Install the height-fixing retaining ring to ensure it works properly and can fix the height. Step 4: Install the universal joint on the connecting shaft of the movable bracket, paying attention to the installation direction and angle. Step 5: Install the movable bracket onto the fixed bracket, fix the pneumatic switch, install the thumb screws to prevent the movable arm from shaking, adjust the angle of the tray, and install the connecting rods to the mouse holder and keyboard holder, etc. Each step should be carried out strictly in accordance with the video requirements to ensure installation quality.
