Homemade Simple Office Chair
There are several common methods for making homemade simple office chairs:
Simple Homemade Folding Chair: First, prepare a piece of woodworking board of the appropriate size, stick masking paper on its surface, and then draw the desired pattern according to personal preference. Use tools to cut out the woodworking board with the drawn pattern. After cutting, carefully sand the edges with sandpaper until they are smooth to avoid scratching the skin during use. Next, assemble the sanded woodworking boards together, use a hole punch to make small circular holes at suitable positions, and install hinges to achieve initial connection. Then, flip the seat over and continue to install hinges for fixation to ensure the chair can fold normally. Finally, open up the chair, find the support points and mark them, and make corner holes. In this way, the simple homemade folding chair is completed.
Simple Wooden Chair: First, prepare four square pieces of wood and fix them into a square frame, which is the basic support structure of the chair. Then, place this square frame horizontally and fix a piece of wood on the inner sides of both long sides of the wooden board to increase the stability and comfort of the chair. This simple wooden chair is relatively easy to make and the materials are easy to obtain, suitable for those who have low requirements for the chair and have certain hands-on skills.
PET Bottle Stool: The required materials are relatively abundant, including PET bottles of various sizes, tape, plywood, polyester fiber cotton, filling material polyester lining cloth, etc. When making it, first take seven PET bottles, place one in the middle and the other six around it, and fix them well with tape to form the first layer. Then, fix the second layer of PET bottles in the same way. Next, prepare plywood, cut it into two circles, and use an electric screwdriver to connect them to the top and bottom of the PET bottle ring respectively to play a role of reinforcement and support. Wrap polyester fiber cotton around the bottles and fix it on the plywood at the bottom of the stool to increase the softness of the chair. Then add filling material on the top of the stool and sew it to make the chair more comfortable. Finally, measure the size of the stool, cut the polyester lining cloth to make a chair cover and fix it. In this way, an environmentally friendly and practical PET bottle stool is completed.
Simple Folding Backrest Chair: First, prepare two main support pillars and fix a piece of wood at the bottom with nails to ensure the stability of the main support pillars. Then, nail a horizontal piece of wood on top as the support frame for the backrest. In this way, the first set of main frames is completed. Subsequently, other parts of the chair can be further improved according to needs, such as adding a seat panel, etc.
