Gold Bar Office Chair Tutorial

There are two ways to make a gold bar office chair: simple and professional, which can be chosen according to different scenario requirements.

Simple Gold Bar Small Chair Tutorial (Suitable for Handmade Decoration Scenarios)

1. Material Preparation: Prepare about 23 high-gloss, rigid gold bars (or similar small bar-shaped materials), as well as transparent tape or a hot-melt glue gun and glue sticks.
2. Production Steps
   • Gold Bar Preprocessing: Stand the gold bars up and perform edge-pressing operations to make them three-dimensional. Press in the two sides and the longer edge, insert the excess parts into appropriate positions, and secure them well with tape.
   • Making the Seat Cushion: Arrange 6 gold bars side by side neatly, glue them firmly, and then turn them over and fix them again. Attach one gold bar to each side and the front and back of the seat cushion.
   • Installing the Chair Legs: Select 4 gold bars and fix them at the four corners of the seat cushion. Use a “building-block” approach to ensure a tight connection and guarantee the stability of the chair legs.
   • Making the Sides: Place 3 gold bars on each side of the chair. After fixing the third gold bar, remove the two outer gold bars.
   • Making the Backrest: Arrange 6 gold bars into a frame shape, fix them in a specific position, remove some gold bars, and finally fix the backrest to the chair.
3. Precautions: Ensure that each step of the production process is firmly fixed to prevent loosening. The size and shape of the chair can be adjusted according to actual needs. If using a hot-melt glue gun, pay attention to operational safety to avoid burns.

Professional Gold Bar Office Chair Tutorial (Suitable for Practical Use Scenarios)

1. Material Selection and Preparation: Select high-quality gold bars with sufficient hardness and ductility, and prepare cutting machines, welding equipment, polishing tools, etc.
2. Design Planning: Determine the style and specific dimensions of the chair. The design should be simple and sturdy. Draw detailed drawings to clarify the shape, size, and connection method of each component.
3. Processing and Production: According to the designed drawings, use a cutting machine to cut the gold bars, and then connect the various components with welding equipment to form the chair frame. Ensure that the welding points are firm and reliable.
4. Surface Treatment: Use polishing tools to polish the surface of the gold bars to improve the aesthetic appeal of the chair and prevent oxidation of the gold bars.
5. Assembly and Testing: Assemble the various components to ensure a firm connection. Conduct a load-bearing test to confirm that the chair can withstand the corresponding weight. Ensure safety before putting it into use.