Dongguang Office Chair Reupholstering

The price of reupholstering office chairs in Dongguang is influenced by multiple factors and has no fixed standard. The price for reupholstering an ordinary office chair is roughly between 200 and 500 yuan, and the specific price needs to be determined according to the actual situation.

Price Influencing Factors

• Chair Type: Reupholstering an ordinary household chair is relatively inexpensive, possibly costing between 100 and 300 yuan per chair. Office chairs, due to their more complex structure, have a higher reupholstering price, generally around 200 to 500 yuan per chair.
• Leather Material: Common artificial leather is affordable, and reupholstering a chair with it may only cost between 100 and 200 yuan. Natural leather has a wide price range. Reupholstering a chair with ordinary natural leather costs about 300 to 600 yuan, while using high-quality top-grain cowhide may cost over 600 yuan per chair.
• Regional Economic Level: In economically developed areas, labor costs are high, so the reupholstering price is more expensive. For example, in first-tier cities, due to high labor costs, shop rents, and other expenses, the reupholstering price may be a certain percentage higher than that in second- and third-tier cities.
• Reupholstering Process Difficulty: If the chair has a unique shape and the reupholstering process is complex, the charge will increase. For example, for some office chairs with special designs, many curves, or requiring special treatment, more time and effort are needed during reupholstering, so the price will naturally increase accordingly.

Replacement Steps

• Prepare Tools and Materials: You need to prepare new office chair leather, a screwdriver, scissors, a lighter, and glue, etc.
• Remove the Old Leather: Turn the office chair upside down, use the screwdriver to remove the screws on the base and armrests, and then remove the old leather and sponge together and keep them well.
• Measure the Size of the New Leather: Use the scissors to cut the new leather to the appropriate size, and heat the edges of the leather with the lighter for better adhesion.
• Adhere the New Leather: Place the new leather in the position of the old leather and use the glue to adhere it. Make sure the leather is adhered flatly without wrinkles or bubbles.
• Install the Old Sponge: Put the old sponge back. If there are any aged parts, you can trim them appropriately to keep it flat, and then cover the new leather over the sponge.
• Install the Base and Armrests: Put the screws on the base and armrests back in place. Make sure they are firmly fixed so that they do not loosen, and then restore the office chair to its normal use state.