Dismantle Office Chair Wheels

The method for dismantling office chair wheels should be selected according to the wheel type. Here are some common methods:

For round-rod wheels, which are a relatively common type. If the wheel is loosely connected to the chair leg, you can simply hold the wheel with your hand and pull it straight up with force. However, if you don't have enough strength to pull it out directly, you can use tools for assistance. Use a flat-head screwdriver, insert its tip into the gap between the wheel and the chair leg, gently pry it to loosen the wheel using the lever principle, and then pull it out. You can also use pliers, clamp the rod part of the wheel, and then gently tap the pliers with a hammer to separate the wheel from the chair leg through vibration, thus successfully removing it.

When dismantling wheels with snap-spring rods, since pulling the rod requires a certain amount of strength, it may be difficult for women with less strength. You can ask a man for help. Prepare a flat-head tool, such as a flat-head screwdriver, insert it into the connection between the snap-spring rod and the chair leg, and pry the old rod with force to loosen the snap spring and then take out the rod. Pay attention to applying an appropriate amount of force during the prying process to avoid damaging the chair leg or the tool.

According to the experience mentioned in August 2025, for some office chairs with larger wheel gaps, you can use needle-nose pliers. Insert its tip into the gap between the wheels, gently pry it to loosen the connection between the wheel and the chair leg, and then try to pull out the wheel by hand. This method is relatively simple to operate, but pay attention to the force applied when using the needle-nose pliers to prevent scratching the chair leg.

When dismantling by laying the chair down, first lay the office chair flat with the wheels facing up. Use a flat-blade chisel to gently tap the connection between the wheel and the chair leg to loosen the roller. After the roller is somewhat loose, use a tool like a hammer, such as a rubber mallet, to gently tap the wheel to gradually separate it from the chair leg and finally completely remove the roller. This method is suitable for all types of wheels, but pay attention to the force and direction of the tapping to avoid damaging the chair leg.