Anyang Office Chair Impact Tester

Currently, no direct information related to the 'Anyang Office Chair Impact Tester' has been found, but office chair impact testers are generally used to test the durability performance of office chairs. The following are common types and their characteristics:

Office Chair Impact Durability Tester: This type of equipment primarily complies with the American BIFMA standard. It uses a magnetic chuck to drive a 125-pound sandbag for impact testing, with a frequency range of 10 - 30 times per minute, capable of completing 100,000 impact cycles. Its control system employs a PLC touch screen, supporting adjustable impact loads from 0 - 300N and a test count range of up to 0 - 999,999 times. Technical parameters include an AC220V power supply, a 1m×1m test platform, and a machine size of approximately 960×660×920mm. This device evaluates the structural stability of office chairs under high-frequency impacts by simulating long-term usage scenarios, making it suitable for quality control in the production process.

Office Chair Repeated Impact Tester: This focuses on testing the durability of the seat surface of office chairs under repeated impacts. During testing, the office chair footrest is fixed, and a sandbag of a specified weight is used to repeatedly impact the seat surface at a set rate and number of times, detecting deformation, looseness, and damage to welded parts at various locations. Its test stroke, direction, speed, time, and number of impacts are all adjustable, complying with the American BIFMA and GB/T10357.3 standards. Common models on the market include xq - 899 and JQ - 818, with suppliers such as Hebei Deke Machinery Technology Co., Ltd. Key technical parameters include a seat height range of 350 - 600mm, a sandbag weight of 100kg, an impact stroke of 2 inches, and a test speed of 20 times per minute, making it suitable for standardized testing of seat durability in laboratories or quality inspection institutions.

Office Chair Seat Impact Tester: This device fixes the office chair footrest and uses a sandbag of a certain weight to repeatedly impact the seat surface at a set time and number of times, detecting deformation, looseness, and damage to welded parts at various locations. Its technical parameters include a seat height range of 350—600mm (optional), sandbag weights of 125 pounds or 300 pounds, an impact stroke of 1 - 6 inches, impact functions supporting single or continuous impacts, a programmable counter ranging from 0 to 999,999 times, PLC program control, a 7-inch touch screen for operation, dimensions of 1000×1450×2100mm, a weight of approximately 230 kg, and a power supply of 1∮, AC 220V, 3A. This device can comprehensively evaluate the performance of seats under complex impact conditions, making it suitable for the research and development and certification of high-end office chairs.